Go Direct* ORP (Oxidation-Reduction Potential) Sensor, measures the ability of a solution to act as an oxidizing or reducing agent, Type: Sealed, gel-filled, epoxy body, Ag/AgCl reference, Storage solution: pH-4/KCl solution, Temperature range: 0 to 60 degree 'C, 12 mm OD
Go Direct* Motion Detector, uses ultrasound to measure the position, velocity, and acceleration of moving objects, Maximum data collection rate: 30 samples/s, Distances measured from 15 cm to 2.5 m, Temperature compensated, 1/4-20 threaded hole, 1.5 m USB cable
Go Direct* Wide-Range Temperature Probe, with Micro USB Cable, -20degC to 330degC Temperature, Temperature sensing element Platinum RTD (100 omega), Maximum temperature that the sensor can tolerate without damage 380degC, Dimension: 28x17 cm
Go Direct* Radiation Monitor, detects alpha, beta, gamma, and X-ray radiation, Sensor: LND 712 (or equivalent) halogen-quenched GM tube with a mica end window, 1.5 to 2.0 mg/cm2 thick, Red LED blinks on radiation detection, Optional audio signal on radiation detection
Go Direct* 3-Axis Magnetic Field Sensor, allows you to determine the magnitude and direction of the magnetic field at any point in space, Measurement range: +/-5 Mt, Operating temperature: -40 deg C to 85 deg C, Dimensions: 19x12.2x0.7 cm, Factory-calibrated
Go Direct* Colorimeter, measures absorbance or transmittance of a liquid sample, Specifications: Range: 0 to 3 (absorbance), Useful range: 0.05 to 1.0 (absorbance), 90% to 10% transmittance (%T), Wavelengths: 430 nm, 470 nm, 565 nm, 635 nm, Connections: Bluetooth, USB
Go Direct* Temperature Probe, is a rugged, general-purpose temperature sensor that students can use to monitor temperature, Temperature range: -40 to 125 deg C, Handle temperature range: -10 to 45 deg C, Resolution: 0.07 deg C, Connections: Wireless Bluetooth, Wired USB
Go Direct* Current Probe User Manual, Probe range: +/-1 A and +/-0.1 A, 300 mA Li-Poly Battery, 24 hours Battery life, 500 full charge cycles (several years depending on usage) Battery life (long term), 1.5 A and 0.5 A non-damaging current, volt: +/-10 V
Go Direct* Gas Pressure Sensor, measures the absolute pressure of a gas, Specifications: Range: 0 to 400 kPa, Resolution: 0.03 kPa, Maximum pressure that the sensor can tolerate without permanent damage: 450 kPa, Connections: Wireless Bluetooth, Wired USB
Go Direct* pH Sensor, is a general-purpose pH sensor used to monitor pH of aqueous solutions, pH range: 0-14, Type: Sealed, gel-filled, epoxy body, Ag/AgCl reference, Shaft diameter: 12 mm OD, Storage solution: pH-4/KCl solution (10 g KCl in 100 mL buffer pH-4 solution)